100-45-17-02
X-Plecs®-TOP 120 RA 1500-B L1-L2
Multiband antenna for mounting on vehicles.
RF ports:
ⓐ - GNSS L1 / L2
Frequencies:
GNSS-Configuration (active)
GNSS / L1 / G1 / E1 / B1 (GLONASS (G1) / 1602) , GNSS / L1 / G1 / E1 / B1 (GPS (L1) 1575,42) , GNSS / L1 / G1 / E1 / B1 (QZSS / 1575,42) , GNSS / L1 / G1 / E1 / B1 (Galileo (E1) / 1575,42) , GNSS / L1 / G1 / E1 / B1 (BeiDou (B1) / 1561,098)
GNSS / L2 / G2 / E6 / B3 (GPS (L2) 1227,60) , GNSS / L2 / G2 / E6 / B3 (GLONASS (G2) 1246) , GNSS / L2 / G2 / E6 / B3 (Galileo (E6) 1278,75) , GNSS / L2 / G2 / E6 / B3 (BeiDou (B3) 1268,52)
GNSS / L5 / G3 / E5 / B2 (GPS (L5) 1176,45) , GNSS / L5 / G3 / E5 / B2 (GLONASS (G3) 1202,25) , GNSS / L5 / G3 / E5 / B2 (Galileo (E5) 1191,80) , GNSS / L5 / G3 / E5 / B2 (Beidou (B2) 1207,52)
Mechanics:
Type (X-Plecs)
Height (53mm)
The X-Plecs-TOP 120 RA bus antenna series is characterized by an extremely flat and compact design. Due to the extreme miniaturization with high antenna gain, this antenna series is used in small installation areas. By using metallic emitting structures without lossy components, a very high efficiency and service life is achieved. The multiband technology with selective port assignment enables the use of several frequency bands on one RF port and cost reduction through unnecessary splitters or couplers.
Product downloads:
Further technical information, assembly instructions, certificates and declarations of conformity can be found here
The matching cable for your outdoor vehicle antenna solution
OmProCab-55
For our bus antennas we recommned the OmProCab55 cable. It is a double-shielded, low-loss coaxial cable with a flexible inner conductor and certification/approval in accordance with ECE R118 for installation in motor vehicles. This cable has very good HF properties and a flexible inner conductor.
DISCOVER OUR CABLES
